How to Make an Outdoor Spiral Bench

A bench doesn’t have to be a rectangle or square. Learn how to build a three-sided spiral bench with built-in planter boxes.

Spiral Planter Bench 01:00

Skill Level
Estimated Cost $275
Download PDF

Tools and Materials

  • (3) 1x6 x 8'
  • (7) 2x4 x 8'
  • (8) 1x4 x 8'
  • 3” decking screws
  • exterior paint
  • paintbrush
  • miter saw
  • measuring tape
  • speed square
  • circular saw
  • palm sander
Find all the tools and materials for this project at .

Related Products

Skill Level: Advanced
Estimated Time: 1/2 day
Estimated Cost: $275

Assemble Seat Frames

Build the frames using three 2x4s. The frames will be 17-1/2” across to match standard seat depth.

  • Cut one board to 20-3/16” (both ends at 30-degrees)
  • Cut one board to 24-3/8” (one end at 30-degrees)
  • Cut one board to 34-1/2” (one end at 30-degrees)
  • Cut one board to 17-1/2” (both ends straight)
    (see Image 2). 

Attach Seat Frames

Fasten the three identical frames together to create the seat base. Use bolts for a strong joint. 

Make Seat Surface

Cut five 1x4s with the same 30-degree angle on one end. Attach these cut 1x4s flush to the edges of each section of the 2x4 frame. Repeat for the other two bench sections.

Trim the Ends

Use a circular saw to cut off the excess 1x4s from the end of each section of bench. This is an easy way to ensure your bench seat is flush all the way around. 

Add Legs

Flip the bench over to attach the legs. Make the legs from 2x4s cut to length at about 17” so your bench will sit about 18” off the ground. (Standard seat height ranges from 16” to 19”.) The six legs will attach using screws (be sure to pre-drill) on the outside corners of the frame on each bench section. Add a leg in the middle of the spiral for additional support.

Mina Starsiak of Good Bones partners with Lowes. Not to be used for alternative clients/purposes.

Photo by: Gary Payne

Gary Payne

Paint or Stain

Mina Starsiak of Good Bones partners with Lowes. Not to be used for alternative clients/purposes.

Photo by: Gary Payne

Gary Payne

Use a sander or hand-sand all the edges smooth. Paint the bench using an exterior-grade paint (we used a paint with built-in primer). 

Build Planter Boxes

Mina Starsiak of Good Bones partners with Lowes. Not to be used for alternative clients/purposes.

Photo by: Gary Payne

Gary Payne

This step is optional; you can leave the bench as-is. We chose to cap off the ends with planters. To make one box, cut two 17-1/2” pieces from a 1x6 for the back and front of the box. For the sides, cut two 5-1/2” pieces from a 1x6; for the bottom of the box, cut a piece of 1x6 to 16”. Assemble using deck screws. Paint or stain the boxes to match the bench. 

Keep Reading

Next Up

How To Make a Farmhouse-Style Outdoor Bench

A custom two-tone bench is a great way to dress up your yard. Select your favorite colors and tackle this project in just a half day.

How to Build a Decorative Curved Picket Fence

Instead of a straight-line fence, learn how to arch the pickets to give your yard an extra burst of curb appeal.

How to Use a Pressure Washer

Discover tips and general information on using a pressure washer to clean a deck and other surfaces around the home.

10 Essential Steps for Getting Your Vegetable Garden Prepped for a New Season

Get your veggie garden ready for the new growing season with these 10 easy tips.

How to Make a Flower Basket Tote

Learn how to make a simple wooden crate that doubles as a fun twist on a traditional basket.

How to Rehab an Old Saw Table

Buying secondhand woodworking tools can be a great way to save some money and get a good.

Cleaning Outdoor Furniture

Learn about the best ways to clean outdoor cushions, canvas seats and chair backs, and white and colored plastic.

Clever Ideas for Repurposing Benches + Stools

Give a lift to rooms and outdoor spaces when you upcycle these pieces.

Band-Saw Basics

When making carefully crafted parts for furniture or cutting the same design into several pieces of wood at once, the band saw is the tool of choice -- and one of the most versatile tools available.

Wood Finishes 411: What You Need to Know

Get helpful advice for picking the proper finish for your project.
More from:


Get Social With Us

We love to Jntuanantapur. You love to Jntuanantapur. Let's get together.

Consult Our A-Z Guide

Everything You Need to Know

Browse a full list of topics found on the site, from accessories to mudrooms to wreaths.  

How-To Advice and Look

Get video instructions about kitchens, bathrooms, remodeling, flooring, painting and more.

Watch Jntuanantapur Downloads Now

Watch Jntuanantapur Network LIVE

Don't miss your favorite shows in real time online.