How to Prepare for Building an Arch or Pergola

The right tools can make all the difference when preparing to build an arch or pergola. Learn how to make your project a success with these basic tips.
Related To:
Measuring Tools Need to be Accurate for Success

Measuring Tools Need to be Accurate for Success

Photo by: DK - Arches & Pergolas ©2000 Dorling Kindersley Limited

DK - Arches & Pergolas , 2000 Dorling Kindersley Limited

The secret of a successful arch or pergola lies not only in a carefully planned design but also in sound construction. A well-made arch or pergola will look impressive and remain solid for many years if you do not cut corners. Always use good-quality tools and the right materials, and set aside enough time to do the job properly. You should be able to do most construction work yourself, although you may wish to employ a bricklayer to build brick posts.

Choose the Right Tools

If you plan to carry out much construction work, it is worth investing in your own set of good-quality tools. The tasks of setting out, groundwork, woodwork, and brickwork require a particular assortment of equipment. If you are planning only one project, then consider renting equipment. Most rental stores will carry the items required for the projects in this book. Make sure you have what you need before you start: stopping or improvising halfway through is inconvenient and even dangerous. Accurate measurements are also crucial to the success of your structure. Be sure to have on hand the necessities of a basic measuring kit: A measuring tape, wood block, string, builder's square, level and wooden pegs.

Building Codes

Before building, always look into local building codes and ordinances that apply to the type of construction you are planning. You may need to obtain a permit, and there may be fees. Contractors may also need to be involved.

Foundations and Footings

The spiked metal supports used in arch and pergola projects may be inadequate in areas where the soil freezes deeply. Check locally about minimum depths for foundations and footings.

Marking Out the Site

A good design will be spoiled by inaccurate setting out. Avoid the temptation to rush ahead, but take your time when measuring to make sure, first, that everything is square. Do not guesstimate the position of post holes: use a builder's square, string line, and wooden pegs to guarantee accuracy. Be consistent with which side of the pegs you measure from, either inside to inside or outside to outside. Always double-check measurements before starting to dig or cutting lengths of lumber.

Planning Tips

  • Check the diagonal measurements between corners to confirm post positions are correct.
  • Allow at least 7ft (2.1m) head clearance between ground level and the underside of the overhead beams.
  • Posts for taller pergolas should be a minimum of 4x4in (10x10cm) thick.
  • Overhead crossbeams are usually about 6x2in (15x5cm) thick, with rafters of the same measurement or 4x2in (10x5cm).

When prepared, mark a site with two post positions, front and back on one side, with wooden pegs, builder's square, and string. Then, using the square and string, mark the position of the other two posts.

Measuring Square Used to Double Check Accuracy

Measuring Square Used to Double Check Accuracy

Photo by: DK - Arches & Pergolas ©2000 Dorling Kindersley Limited

DK - Arches & Pergolas , 2000 Dorling Kindersley Limited

Once all four points have been set, check all the base measurements including the diagonals (which should be identical lengths) to confirm that everything is correctly set out.

Measuring Accurately

As work progresses, develop the habit of checking measurements regularly with a measuring tape. Frequently confirm that posts are vertical and beams are horizontal, using a level. Avoid approximating or guessing measurements, and always double-check them before cutting out joints or permanently setting with screws or nails.

Measuring Rafters

Rafters should be spaced out evenly on the overhead beams. Mark all the positions on both beams with a pencil. This is especially important if you are cutting notches yourself.

It is Important to Measure for Accuracy on Project

It is Important to Measure for Accuracy on Project

Photo by: DK - Arches & Pergolas ©2000 Dorling Kindersley Limited

DK - Arches & Pergolas , 2000 Dorling Kindersley Limited

Vertical Check

Use a level on the front and side of each spiked metal post support to check that they are driven into the ground vertically.

Use Level to Make Vertical Checks for Accuracy

Use Level to Make Vertical Checks for Accuracy

Photo by: DK - Arches & Pergolas ©2000 Dorling Kindersley Limited

DK - Arches & Pergolas , 2000 Dorling Kindersley Limited

Keep Reading

Next Up

How to Safely Build and Maintain Arches and Pergolas

Before starting a garden project, it's necessary to take the right safety precautions and learn how to maintain your arch or pergola for a lifetime.

How to Choose an Arch or Pergola Kit

Not everyone is handy with a set of tools and a few building supplies. Here's how to choose an arch or pergola kit that will suit your home garden needs.

Choosing Materials for Arches and Pergolas

If a do-it-yourself arch or pergola is up your alley, then the right construction materials are a necessity. Here's what you will need to build from the ground up.

Building a Strong Foundation in 7 Steps

Our experts break down the basics of how a home's foundation is installed.

Everything You Need to Know About Walls

Host Jeff Wilson explains how exterior and interior walls are constructed in a new home.

How to Build a Decorative Curved Picket Fence

Instead of a straight-line fence, learn how to arch the pickets to give your yard an extra burst of curb appeal.

How to Landscape a Sloping Backyard

See how the owners of a large townhome have a landscape designer solve the problem of a sloped backyard and a dull front yard.

How to Design a Great Yard with Landscape Plants

Make sure you put the right plant in the right place. Learn how to choose and where to place your plants so you can create a low-maintenance landscape that will thrive for years to come.

How to Create a Jewelry Rack

How to create a funky jewelry rack from an old record player and magazine rack.

How to Make Unity Candles

Unity candles can be very expensive. Learn how to make your own for less than $30.

Get Social With Us

We love to Jntuanantapur. You love to Jntuanantapur. Let's get together.

Consult Our A-Z Guide

Everything You Need to Know

Browse a full list of topics found on the site, from accessories to mudrooms to wreaths.  

How-To Advice and Look

Get video instructions about kitchens, bathrooms, remodeling, flooring, painting and more.

Watch Jntuanantapur Downloads Now

Watch Jntuanantapur Network LIVE

Don't miss your favorite shows in real time online.